SW(eet) 1500

Prototype Monday 3

Ahhh... the EMD SW1500. It's my favourite engine. There's just something about it...

The EMD SW1500 was constructed directly after the SW1200 and was the builder's second model to employ its upgraded model 645 prime mover. As with the SW1000 (which was the first to use the 645 engine), the SW1500 featured a bulkier carbody and was a bit heavier from earlier models although its intended use remained the same, working light branch lines or in industrial settings. With the horsepower rating, weight, and top speed the switcher was essentially a road switcher (it offered nearly the same ratings as the GP7 released a decade earlier). Once again railroads found the SW1500 to their liking and many Class Is purchased the model, very likely due to its extra horsepower allowing it to be used in numerous applications. Today, SW1500s remain quite common doing the tasks they were originally intended for on large and small railroads around the country. from: http://www.american-rails.com/emd-sw1500.html

According to rrpicturearchives.net the Quebec Gatineau Railway (QGRY) has or had seven SW1500s:

Unit #	History	Model	Serial#
QGRY 1500	ex-PC 9534	SW1500	7355-25
QGRY 1501	Ex CR Exx PC 9508 SW 1500	SW1500	37066
QGRY 1502	Ex-PC 9580	SW1500	73622-21
QGRY 1504	ex-PC 9509	SW1500	37067
QGRY 1505	ex-PC 9538	SW1500	7355-29
QGRY 1506	ex-PC 9554	SW1500	7355-45
QGRY 1507	ex-PC 9519	SW1500	7355-10

 

On my layout I have one custom painted QGRY SW1500 numbered 1504 (see pics above). For additional switching, I'll also have some help from two Genesee & Wyoming Atlas HO Silver Series EMD MP15-DCs. The MP15DC replaced the SW1500 in EMD's catalog, and is superficially very similar to the predecessor model, using the same engine (a V12 EMD 645-series powerplant) in a similar design of hood and bodywork. The primary difference is the MP15’s standard Blomberg B trucks. https://en.wikipedia.org/wiki/EMD_MP15DC

All three units have Soundtraxx Tsunami DCC sound decoders installed.

Sunday Funday with Minions and Poutine

Shoutout Sunday 2

There are a lot of great modelers out there that inspire me to be better and do better. Today I want to share two instances that reminded me how much fun this hobby can be.

The first is from the Port Rowan in 1:64 blog by the ever inspiring Trevor Marshall. Trevor inspired me for years when he co-hosted The Model Railway Show, a podcast about the hobby. Recently his Keeping the Minions under control blog post featured some hilarious photos of some (not-so) prototypical railroad employees. Thank you Trevor for the inspiration and the laugh. Sometimes this hobby gets so overwhelming intense that it's great to remember to how much fun it really is.... or should be!

And on the topic of fun... The second shoutout goes to GERN Industries, which has been a longtime favourite of mine.

I found doctorwayne's GERN Industries Gibson Works when I was on a mrr.trains.com forum searching for ideas of prototypical industries that I could model. I hadn't thought to model whimsical (oddball) industries until I saw GERN and immediately loved the idea of a unique (and fun) industry that only existed in my 1:87 world.

GERN was the inspiration for Poutine Quebec (PQ)* - a fictional industry that I plan to model on my layout. Inbound will be cheese curds in reefers, potatoes in boxcars and light brown gravy powder in hopper cars along with packaging and other assorted supplies. Once a week there would be a tank car shipment called the 'gravy train' that would bring in a heavier grade of gravy for storage in onsite tanks. Outbound would be the finished Poutine Quebec product to market.

I think that I read somewhere that GERN produces an industrial FLUX food additive. I wonder if GERN is still in existence producing FLUX nowadays and if the Quebec Poutine Works could be a customer?

* For those who may be from other parts... this is poutine.

Moose, deer, bears, even wolves…but no beavers?

Scenery Saturday 2

‘Why doesn’t anyone make a HO scale beaver?’, I wondered.

I googled… nothing. I found moose, deer, bears, even wolves, but no beavers. The beaver is iconic. A Canadian symbol. The beaver (and it’s pelt) lured the explorers to this land. Hell, the beaver is so important it’s even on the shield of the Canadian Pacific Railway. So… I wondered, ‘Why no HO scale model beaver figures?’

This post isn’t really about beavers; at least not yet. The reason that I was looking for a 1:87 size beaver in the first place is what I want to explore. I wanted to practice my scenery skills and specifically, pouring Envirotex epoxy resin to make a water feature. I had watched the YouTube videos, read the MR articles and seen images on blog posts and now it was time to play. I grabbed a piece of scrap foam board, a bottle of glue and some ground foam and went to town. As you can see the results turned out pretty well. I was happy with my little test project.  But one thing was missing… you guessed it.

So what to do if no one makes a 1:87 size beaver. Happily in this day-and-age of 3D printing almost anything is possible and if you can’t find it – you can make it. And that’s exactly what I did with the help of Autodesk 123D Design‘s free app and Shapeways.com.

P.S. Comment, email, tweet or drop me a line if you’d like some 3D printed HO scale beavers for your layout.

Freight Car Friday 2

Posted onSEPTEMBER 11, 2015

Today’s freight car is the Cylindrical Covered Hopper – and you’ll find a lot of them on my layout.

QGRY provides rail services to both the Ports of Trois-Rivieres and Quebec City and both Ports have large elevator facilities for grain. At Trois-Rivieres it’s Les Élévateurs des Trois-Rivières Ltée with a storage capacity of 110 000 tonnes of grain, 78 000 tonnes of alumina and 20 000 tonnes of coke. The elevator handles a throughput of about 1 200 000 tonnes per year, evenly divided between grain and other commodities. The elevator can receive grain by ocean ship, laker, rail, or truck. It serves as a grain distribution facility to supply feed grains to the local Quebec market. It also receives local grain by truck for export.

In Quebec City, it is the massive Bunge silos with a capacity of 225,000 metric tonnes of storage space, used to store wheat, barley, corn and soybeans. Over 3.4 million tonnes of grain are handled annually, with a capability of loading up to 5,000 tonnes an hour.

From Eric Gagnon’s excellent blog Trackside Treasure: Cylindrical grain cars are one of Canada’s best-known contributions to the North American railcar network. Over 19,000 government covered hoppers, built by Hawker-Siddeley, National Steel Car and Marine Industries have been carrying Canadian grain on rails since 1972.

Also, there is an excellent post on the history and specifics of cylindrical covered hoppers at trains.com

Happily, HO scale Cylindrical Hoppers are pretty easy to find and I have a bunch of the excellent Intermountain Cylindrical Covered Hoppers – Trough Hatch Version. Now on to the fun stuff – graffiti and weathering them. But that is a post for a future Workbench Wednesday…

Video Thursday 2

Since yesterday I shared my new QGRY Bachmann DCC HiRail vehicle project, it only seems fitting to feature a video review of the unit. Really can't wait to get this up and running on the layout!

By the way, this video review comes from jlwii2000. Check out his excellent youtube channel here.

Workbench Wednesday 2

MOW equipment and HiRail vehicles add a level of operating interest to a layout. I always thought that it would be fun to run something on the layout in addition to locomotives. Recently I purchased a Bachmann DCC HiRail vehicle and my goal is to customize it to create a QGRY vehicle.

Happily I was able to get Microscale Genesse & Wyoming (GW) Canada Region Shortlines and Operators - Waterslide Decal - N Scale Part#:60-1501 and some red and white safety stripes.

Using this prototype photo that I took in the St. Therese yard in October 2013 I plan to detail the truck. So... that's what's on my workbench this week.

Prototype Monday 2

Prototype Monday is not just for motive power – it’s also about things and places from the prototype that inspire my layout. I have decided to feature the Port of Trois-Rivières as the main focus of my layout. Reason for this was three-fold (1) QGRY has the sole rights to service the Port (2) there are a lot of rail-served commodities and facilities to model and finally, (3) it sets the layout firmly in a time and place.

It’s really amazing the information that you can find online and research is yet another of the facets of the hobby that I find so enjoyable. The Port of Trois-Rivières has an excellent downloadable brochure online that will serve to inspire my modeling efforts.

Shoutout Sunday

Today I want to write a special thank you. That’s what Shoutout Sunday is all about; recognizing someone (or something) that has had an impact on my journey in the hobby.

The first person to help me along in the hobby was Luc Sabourin. I first met Luc in October 2013 at a local trainshow and he directed me to his excellent online image posts of QGRY locomotives at http://www.rrpicturearchives.net. I was planning a railfanning trip to scope out the QGRY route from Montreal to Quebec City and Luc had done this trip back in 2009.

I really appreciated his encouragement and Luc was the first person in the hobby to share his enthusiasm and knowledge with me. He suggested that I visit Van Horne Hobbies in Montreal (111 Blvd St Martin East (450) 669-4175). Somewhere I probably would never have found without his tip.

In the last two years, Luc has introduced me to some great model railroaders and I look forward to seeing him at the shows each year.  So a special Shoutout Sunday to you Luc! Thanks for starting me off in this great hobby!

Scenery Saturday

Not sure if the layout qualifies for Scenery Saturday yet as I am barely at the 'Plywood Pacific' stage but it's important to celebrate progress. Less than a year ago, the layout looked like this...

And now, after a door has been (re)moved and some demolition of some storage closets (which was wayyy too much fun) I have the layout footprint that I wanted!

Now that the backdrop is painted and the valence is up I feel like the layout is slowly becoming real. It is still VERY much a work in progress, as I find it's easier to build than plan. This has the definite disadvantage of taking longer as not everything I build works out and I find that there are a lot of 'doovers', however I just prefer seeing it in 1:1 real size before I know if it's going to work for me.

Freight Car Friday

Many thanks to Chris van der Heide's excellent Algoma Central in HO Scale blog for the idea of Freight Car Friday. I am happy to 'borrow' this idea and I owe a debt of gratitude to all of the bloggers who have inspired and taught me in the past two years. It's because of the knowledge that the online modeling community has shared with me on the web and the debt to them that I started QGRY in HO Scale.

So without further ado, this inaugural Freight Car Friday's car is...

The 50' Newsprint Boxcar 

I took this shot of QGRY 75017 at the Port of Quebec City in October 2013. According to http://freight.railfan.ca this car was built by National Steel Car in Hamilton, ON in 1979. This looks to be a repainted CP Action Green car with the 1970's black-and-white multimark painted out.

According to the article on Newsprint Boxcars by John Riddell in the June 2002 Model Railroader (pg 70) These CP cars started out as being originally built for the Minnesota, Dakota and Western and had the reporting marks "MDW" before they were acquired by CP in 1988. I have not been able to confirm the history of this but I am sure that this car has seen years of service and as the consumption of paper decreases and more and more Paper Mills close, these cars will be seen less and less.

Happily, HO models similar to these cars exist and the first ever weathering project I attempted was to take a shiny new CP car and turn it into a QGRY rustbucket. Modeling a Paper Mill ensures that these cars will live on on my layout. 

Video Thursday

Name kinda says it all .... enjoy!

Workbench Wednesday

What's on the workbench? Today is the day to find out... it's Workbench Wednesday, the day that I share what I'm working on. Could be a structure kitbash or a scratchbuild project or a locomotive detailing job. Or perhaps some prototypical rolling stock weathering. Tune in each Wednesday and I'll share a neat project in progress and complete with how tos and step-by-steps pics.

Today, I'd like to share a story about imagination. 
One of the aspects of model railroading that I like the most is the creativity. Especially the fun of building something from unexpected items. Being a model railroader means looking at items in new and strange ways. I find myself wandering through dollar stores wondering how I can turn everyday objects into prototypical 1/87 scale items.

Recently I was opening my son's apple sauce at breakfast when I noticed what a wonderfully odd lid it had. Why anyone would design an apple sauce container lid like this I have no idea, however it sure looked like a candidate for an interesting flatcar load.

So that's what's on the workbench this week. A really neat load. I sprayed the lids primer grey. Built supporting cradle structures out of wood and am pretty happy with the results thus far. So what is it.... who knows... could be a load of industrial equipment for the Quebec Poutine Works? Or part of a wind turbine built at Marmen in Trois Rivieres? Or perhaps something for the Paper Mill? All that matters is that it will be a cool and unique load that I built. Oh yeah, and it was fun!

Next up will be experimenting with various metal beading wire, silver thread and elastic thread to tie the loads down and then weathering the car to look like its seen better days. But that is a post for another day.

Trainshow Tuesday

Happy September. And happy Tuesday... today we honor the official start of the model railroading season with the second in our regular weekly featured blog posts Trainshow Tuesday.

Expect updates every Tuesday on exciting events and shows that I will be attending as well as posts of some exciting treasure finds from the shows.

I can't believe the increase in prices for rolling stock in the two years that I've been in the hobby. I've seen prices more than double with many new cars exceeding $50 Canadian dollars. Crazy. I knew that this was an expensive hobby...but there are limits.

I've alway had great luck finding really great cars at the many shows that we have in southern Ontario. One of my absolute favourites is coming up in a couple of weeks. The LMRA Flea Market is September 19th, 2015 from 10 AM to 3 PM at Apostles Continuation Church, 10 Belfield Road, Toronto (Kipling & Hwy 401).

Details at http://www.lmra.ca/flea_market.html

For a great list of upcoming shows, I like to consult http://www.railwaypages.com/ontario-show-and-event-calendar

Please feel free to comment if you plan on attending the LMRA Flea Market or any of these show. I'd love to connect with other model railroaders in the Toronto area.